The tubing used in MANTECH peristaltic and metering pumps is compatible with many types of chemicals. The following is a list of chemicals that are not recommended to be used with MANTECH tubing/pumps.
*Chemicals without listed concentrations are assumed to be 100% concentrations/the maximum percent solubility in water.
Methyl Ethyl Ketone (MEK)Methyl Isobutyl Ketone
| Acetaldehyde | Ethyl Benzoate | Methyl Methacrylate |
| Acetone | Ethylene Bromide | Mineral Oil |
| Aliphatic Hydrocarbons | Fluoboric Acid, 48% in w | Mineral Spirits |
| Amyl Alcohol | Fluorine Gas | Motor Oil |
| Aqua Regia | Formaldehyde, 37% in w | Naphtha |
| Aromatic Hydrocarbons | Fuel Oil | Naphthalene |
| ASTM Reference No. 2 Oil | Furfural | Nitric Acid, 68-71% in w |
| ASTM Reference No. 3 Oil | Gasoline, Automotive | Nitrobenzene |
| Benzaldehyde | Heptane | Nitromethane |
| Benzene | Hexane | Oils, Essential |
| Benzenesulfonic Acid | Hydrobromic Acid, 20 -50% in w | Oils, Hydraulic (Phosphate Ester) |
| Bromine, Anhydrous Liquid | Hydrobromic Acid, 100% in w | Oils, Hydrocarbon |
| Butyl Alcohol | Hydrofluoric Acid, 10% in w | Ortho Dichlorobenzene |
| Carbon Disulfide | Hydrofluoric Acid, 25% in w | Paraffins |
| Carbon Tetrachloride | Hydrofluoric Acid, 40 -48% in w | Picric Acid, 1% in w |
| Chlorine, Wet Gas | Isooctane | Skydrol 500A |
| Chlorobenzene, Mono, Di, Tri | Jet Fuel, JP8 | Styrene Monomer |
| Chloroform | Kerosene | Sulfur Chloride |
| Chlorosulfonic Acid | Ketones | Sulfuric Acid, 95-98% in w |
| Cresol (m, o, or p) | Lemon Oil | Tetrahydrofuran |
| Cyclohexane | Limonene-D | Toluene |
| Cyclohexanone | Lubricating Oils, Petroleum | Trichloroethylene |
| Diesel Fuel | Methyl Ethyl Ketone (MEK) | Turpentine |
| Dioxane | Methyl Isobutyl Ketone | Xylene |